Cultured Marble |
Recomenndations for routine care and cleaning:
1. DO NOT RUN SCALDING HOT WATER - Water Tempature should not exceed 120 degrees. Excessive Water Temperature can fracture the bottom of the Sink and TUb. Water Heater should be adjusted accordingly.
2. To maintain the luster and help resist scratching or staining, a liquid or paste Automotive Wax (Turtle Wax) can be used. (Recomeend Once A Year) For best results use a cultured marble polish such as; Hopes Cultured Marble Polish, Marble Magic, or Gel Gloss.
3. DO NOT USE ABRASIVE CLEANERS: Such as: Soft Scrub, Comet, Ajax, Etc. These Cleaners Contain Fine Granules that after a period of use will dull and scratch finish.
4. Liquid Cleaners are recommened for Cultured Marble Products such as: Windex, Formula 409, Dow or Lysol Foaming Bathroom Cleaner, Top Job, Fantastic, Etc.
Cleaning tips for Whirlpool System's
1. Fill the bath tub with warm water.
2. Add one cup of non-abrasive/non-ammonia based electric dishwater detergent or granule laundry detergent, or vinegar.
3. Immediately turn whirlpool system on and allow it to run for approximately ten minutes.
4. Turn whirlpool off and drain bathtub.
5. Fill bathtub with lukewarm water.
6. Run whirlpool system for ten or fifteen minutes to purge all detergents from pipe, jets, and pumps. Immediatley clean residue from cultured marble - see care instructions above.
7. Repeat this process once a month, or as needed, depending on frequence of use.